PORSCHE 997 SSI EXHAUST
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Schnell performance header set Porsche Boxster 2.5l 97-99
Schnell_ - the absolute highest quality, performance increasing, sound enhancing exhaust systems available for your Porsche
One piece, cast collector junction for optimum performance. Much more percise and durable thatn anything available.
Formula 1 nascar and indy car style merge collector. Maxes your exhaust airflow. Only seen on systems twice as expensive.
100% mandrel bends for the absolute best possible airflow.
Features:
-polished t304 stainless steel (ss)
-14 gauge ss for superior strength
-expensive cast junction collector!
-stainless steel tig welds
-sold as a pair.
-direct bolt-on
-10 hp + to...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,089.44
Make a selection
This set of pipes allows you to remove the secondary cars on your 2.5l Boxster for a more free flowing exhaust. to make installation easier, order installation kit rFVDmk986300. Note: reprogramming of dme necessary for proper running engine. Removing catalytic converters or tampering with emissions devices are for off-road use only and may void your warranty.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment BOXSTER 1997-04
Brombacher 997 tt stainless steel race pipes
Facts:
- + 35 crank hp & + 25 crank torque
- 3" tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage.
- weighs 7 lbs. (3,1 kg)
- t 316 stainless steel for improved durability over t 304.
- bolts up to the turbochargers, replacing both the cats and the muffler.
- reduces turbo lag and backpressure.
- exhaust tips are not included! Stock tips will fit.
- intoxicating growl at idle, partial throttle and wide open throttle.
- made in Germany
- programming or o2 sensor simulators are necessary, as the lack of catalytic converters will throw the check engine light. (see part numbers below)
Figures:
Genuine:
Engine - 6 cylinder...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $456.50
Make a selection
This set of pipes allows you to remove the secondary cars on your 2.7l/3.2l Boxsters for a more free flowing exhaust. Note: reprogramming of dme necessary for proper running engine. removing catalytic converters or tampering with emissions devices are for off-road use only and may void your warranty.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment BOXSTER 1997-04
Perfect for those who are looking for a small increase in sound and performance, with subtle low tones and more pronounced higher pitched rasp. If you are looking for a more conservative muffler or are running sport cats this muffler is a perfect choice. - + 5 crank hp & + 4 crank torque. - total weight is 28 lbs. (12.8 kg). That is a savings of 12 lbs. - t 304 stainless steel (polished). - made in europe. - simple bolt on, modifications are not necessary. - no dme / ecu programming is necessary. We recommend purchasing replacing your aging muffler straps, sleeves, rings and hardware with one of our pre-packaged muffler installation kits. Use part # FVDmk9930011 for 1995 and earlier cars. Use part # FVDmk993001...(choose a part on the right to read more)
General Fitment 911 1994-98
From $1,148.72
Make a selection
This sound version edition of our sport mufflers gives your Porsche a more pronounced, aggressive sound compared to our TUV (quieter) mufflers. These end-mufflers are much less restrictive than the factory system and produce more power with increadible sound! This system is for the person who truly wants to hear the deep, throaty sound their Porsche is capable of. Reuses factory tips or any aftermarket tip designed to fit OEM exhaust. Tech tip: repair-kit FVD mk 993002
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
From $1,054.70
Make a selection
Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary on 997.2 GT3
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggre...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $6,698.73
Make a selection
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
The speed technologies Boxster 986 exhaust provides a more aggressive, louder and deeper tone as compared to the stock exhaust, yet is free of cabin drone. The enhanced note of this system will provide a very sporty sound and is very similar to the optional OEM Porsche sport exhaust, so you can enjoy your Boxster to the fullest.
Lifetime warranty of manufacturing defects for original owner.
The speedtech 986 exhaust fits all...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,343.25
Make a selection
The ultimate stainless steel system for the street. Completely civilized while cruising and opens at higher rpms. Quieter than the street / clubsport versions. More low and mid-range torque. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 25 crank hp & +24 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - t 316 lightweight stainless steel for improved durability over t 304. - 3.5" (90 mm) dual oval, double walled polished tips included. - intoxicating growl at idle, partial thrott...(choose a part on the right to read more)
General Fitment 911 1994-98
From $10,723.61
Make a selection
The perfect compromise for you and your loved ones. Rich, deep race car tones with the valves open and soft subtle, completely stock sounds with them closed. Torque is better than our other systems in the low range with the valves closed and horsepower is better with the valves open. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 27 crank hp & +25 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - 3.5" (90 mm) dual oval, double walled polished tips included. - dual high quality ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $11,730.62
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with 2 x 90mm tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs ?hd? Sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) saving?s over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- intox...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,702.68
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with rsr style tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs "hd" sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) savings over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- into...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,106.10
Make a selection
Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips
Facts:
- + 25 crank hp & + 25 crank torque
- catalytic bypass
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggressive sound similar to the 997 cup car. Our exhaust ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $4,331.80
Make a selection
"brombacher" exhaust system for 997 GT3/rs (sound version) with rsr style tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 2 3/4" (70mm) angle cut rsr center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,507.40
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,994.80
Make a selection
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- 1,000 degree celcius titanium
- equal length header set up for maximum torque gain
- weighs 48 lbs. (21,9 kg),
- 38.5 lb (17,5 kg) weight savings over stock
- includes all necessary clamps and mounting brackets
- 2 x 3.5"(90mm) blue flamed titanium center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhaus...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$20,056.30
Make a selection
"brombacher" titanium race system (sound version) for GT3/rs
Facts:
- + 20 crank hp & + 19 crank torque.
- complete system in titanium (without sidemufflers)
- 200 cell high flow, titanium tri metal German hjs sport catalysts
- 2 x 90mm tailpipes.
- weighs 28.6 lbs (13kg)!
- 1000 degree celcius, high grade titanium material
- 105-107 db
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
The titanium tips can be ordered ?flamed? Which exhibit?s the blue tint.
All titanium systems not created equal! Brombacher exhausts systems are nearl...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$13,066.90
Make a selection
+650hp 997 tt (sound version) stainless steel exhaust system
The +650 hp FVD sport exhaust system is specially designed for vehicles with performance increases of more than 485kw (650ps). Back pressure is extremely reduced trough specific guidance and piping in the exhaust muffler.
- 200 hd cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 39 lbs. (18,1 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- dme programming necessary.
We use the latest hjs cats, they are nicknamed ?hd? For high d...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$5,864.23
Make a selection
Back pressure is extremely reduced trough specific guidance and piping in the exhaust muffler.
- 200 hd cell high flow, tri metal German hjs sport catalysts
- weighs 39 lbs. (18,1 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- dme programming necessary.
We use the latest hjs cats, they are nicknamed ?hd? For high durability matrix design catalytic converters. They have a sm-matrix (winding of three flat and corrugated foils) and a special connection to the matrix sheath, which equates to extremely high durability for track and street use. The added benefit is that ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $5,815.70
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,731.90
Make a selection
"brombacher" titanium race system (sound version) for 2010 GT3/rs
Facts:
- + 20 crank hp & + 19 crank torque.
- complete system in titanium (without sidemufflers)
- 200 cell high flow, titanium tri metal German hjs sport catalysts
- 2 x 90mm tailpipes.
- weighs 28.6 lbs (13kg)!
- 1000 degree celcius, high grade titanium material
- 105-107 db
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
The titanium tips can be ordered ?flamed? Which exhibit?s the blue tint.
All titanium systems not created equal! Brombacher exhausts systems are ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$13,066.90
Make a selection
B&b headers Porsche Boxster 97-99
Each billy boat performance exhaust system incorporates 3 generations of fabrication skill and racing talent. Every system starts with t-304 stainless steel, known throughout the industry as the highest quality material practical for after-cat exhaust applications. All exhaust tubing is mandrel bent on sophisticated cnc machinery for a precise fit and uninterrupted exhaust flow. The use of t-304 stainless steel flanges also offers high strength and complete resistance to harsh elements. All hangers, resonators, and tips are t-304 stainless steel as well. Billy boat performance exhaust mufflers are crafted in-house with years of racing and street development invested into...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$2,346.41
Make a selection
B&b muffler Porsche Boxster 97-99
Each billy boat performance exhaust system incorporates 3 generations of fabrication skill and racing talent. Every system starts with t-304 stainless steel, known throughout the industry as the highest quality material practical for after-cat exhaust applications. All exhaust tubing is mandrel bent on sophisticated cnc machinery for a precise fit and uninterrupted exhaust flow. The use of t-304 stainless steel flanges also offers high strength and complete resistance to harsh elements. All hangers, resonators, and tips are t-304 stainless steel as well. Billy boat performance exhaust mufflers are crafted in-house with years of racing and street development invested into...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$2,064.68
Make a selection
B&b muffler Porsche Boxster 00-03
Each billy boat performance exhaust system incorporates 3 generations of fabrication skill and racing talent. Every system starts with t-304 stainless steel, known throughout the industry as the highest quality material practical for after-cat exhaust applications. All exhaust tubing is mandrel bent on sophisticated cnc machinery for a precise fit and uninterrupted exhaust flow. The use of t-304 stainless steel flanges also offers high strength and complete resistance to harsh elements. All hangers, resonators, and tips are t-304 stainless steel as well. Billy boat performance exhaust mufflers are crafted in-house with years of racing and street development invested into...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$2,064.68
Make a selection
Aggressive track-designed exhaust system providing maximum flow and power; recommended for off-road and track use only
Features:
Increases power and improves throttle response
General Fitment BOXSTER 1997-04
$2,350.55
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|